Features:
- Wireless control, easy to install
- Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage 12V / 24V.
- You can rotate the motor in or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors doors.
- Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
- One/several transmitters can control one/several receivers simultaneously.
- If you use two or more receivers in the same place, you can set them with different codes.
- Transmitting Frequency: 433MHz
Receiver:
- Model No: S1F2-DC12 / S1F2-DC24
- Coding Type: Fixed code or learning code
- Coding Setting: By learning
- Power Supply (Operating Voltage): DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)
- Output: DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)
- Case Size: 74mm x 54mm x 28mm
- Quiescent Current: 5mA
- Rated Current: 5A
- The Maximum Instantaneous Current of Starting Motor: 10A
Transmitter:
- Model No.: 0021102(CWC-3)
- Channel: 3 CH
- Waterproof
- Remote Control Distance: 50m / 300ft (theoretically)
- Encode: Fixed code by soldering
- Unit Size: 58mm x 30mm x 12mm
- Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Usage:
- Power supply:
- Connect power supply 12V / 24V to terminal “INPUT”; connect to terminal “OUTPUT”. You can exchange the output wires of to change the rotating direction of .
Setting control mode Interlocking: Connect Jumper S1
Function of transmitter:
- Press button ▲ on remote: terminal “Output” output DC power, motor rotates in positive direction.
- Press button ▼ on remote: terminal “Output” output DC power, rotates in reversal direction.
- Press remote: motor stops.
- of manual buttons in :
- Press button K3 in : terminal “Output” output DC power, motor rotates in positive direction.
- Press button K1 in : terminal “Output” output DC power, rotates in reversal direction.
- Press button K2 in : motor stops.
Setting control mode Momentary: Connect Jumper S2
Function of transmitter:
- Press and hold button ▲ on remote: terminal “Output” output DC power, motor rotates in positive direction. Release button: motor stops.
- Press and hold button ▼ on remote: terminal “Output” output DC power, motor rotates in reversal direction. Release button: motor stops.
- Function of manual buttons in receiver:
- Press and hold button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction. Release button: motor stops.
- Press and hold button K1 in : terminal “Output” output DC power, rotates in reversal direction. Release button: motor stops.
Restrictive function:
- You can connect two restrictive switches to terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the motor will work normally; if the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1” is connected, the motor will work in reversal direction; when the restrictive switch “X1” is disconnected, motor will stop automatically. When the restrictive switch “X2” is connected, the motor will work in positive direction; when the restrictive switch “X2” is disconnected, motor will stop automatically.
- When you don't want to use the restrictive switches, you need to connect the terminals “X1” and “X2” by two wires.