This is a mini pen-type linear actuator with a 200mm stroke, supporting 12V or 24V DC input. It features a compact, space-saving design with a small form factor, and delivers a maximum thrust of 120 N / 12 kg / 25 lbs, making it ideal for space-constrained applications.
It is widely used in doors, windows, cellars, trapdoors, hatchways, solar
tracking system, medical devices, agricultural machinery, vehicles, ships,
elevator platforms, lifting tables, TV lifts, robots, cabinetries, massage
sofas, electric beds, medical chairs, and other electrical equipment. It can
open, close, push, pull, lift, and descend these devices.
It can also replace hydraulic and pneumatic products to save power consumption.
Key Features:
- High-quality products and high-quality services
- Metal housing, able to work in very harsh environments
- Metal gearbox, high strength wear-resistant gear
- Stainless steel telescopic tube and aluminum alloy outer tube, good corrosion resistant
- Strong thrust, up to 120 N / 12 kg / 25 lbs at 9.5mm/s
- Two speed options: 9.5±1mm/s, 26±2mm/s
- Multiple stroke options, from 50 mm to 300 mm, any stroke within this range can be customized (e.g. 70 mm, 125 mm, 270 mm)
- Advanced waterproof and dustproof technology
- Low power consumption and low noise
- External overcurrent protection, linear actuator will automatically stop when stroke rod reaches the limit position.
- With auto-locking capability to hold load position after stopping, and no power supply is required
- Maintenance-free
Operation:
When the red power wire is connected to the positive pole of the DC power
supply and the black power wire is connected to the negative pole of the DC
power supply, the stroke rod will extend outward; after switching the power
in the reverse direction, the stroke rod will retract inward.
Stroke and Length (Model 0041584)
| Parameter | Value |
|---|---|
| Stroke | 200mm |
| Retraction Length | 325mm (center distance between two mounting holes when the linear actuator is fully retracted) |
| Extension Length | 525mm (center distance between two mounting holes when the linear actuator is fully extended) |
The linear actuator has external overcurrent protection, when the linear actuator is fully retracted or fully extended, it will stop automatically.
We can customize the stroke and retraction lengths to meet customer specifications during production. For example, specify a stroke of 170mm and a retraction length of 355mm.
Note 1: The specified retraction length must be greater than the original length. For example, a specified retraction length of 355mm is greater than the original length of 325mm.
Note 2: The specified stroke must be less than the original stroke. For example, a specified stroke of 170mm is less than the original stroke of 200mm.
Product Specifications
| Parameter | Value |
|---|---|
| Working Voltage | DC 12V or DC 24V (24V most commonly used) |
| Stroke | 8 inches / 200 mm |
| Optional Speed (No-load) | 9.5±1mm/s, or 26±2mm/s (The actual working speed will gradually slow down as the load increases.) |
| Max Load Capacity | 120 N / 12 kg / 25 lbs at 9.5mm/s, or 30 N / 3 kg / 6 lbs at 26mm/s (Linear actuator can get maximum load capacity when it operates in the vertical direction, and the pulling force is less than pushing force.) |
| Recommended Power Supply | 12V/3A or 24V/3A |
| Outer Tube Diameter | 20mm [0.787 in] |
| Telescopic Tube Diameter | 10mm [0.394 in] |
| Front / Rear Connector Mounting Hole Diameter | 5mm [0.197 in] |
| Housing Material | Aluminum Alloy |
| Stroke Rod Material | Stainless Steel |
| Gear Material | Steel Alloy |
| Motor Type | Brushed DC Motor |
| Duty Cycle | 10% |
| Service Life | approx. 25,000 cycles |
| Power Cable | Ordinary Two-core Wire |
| Certifications | CE |
| Environment Temperature | -26℃ to 85℃ |
| Operating Noise | about 38dB~42dB (Linear actuators with different parameters will have different noise levels.) |
| IP Rating | IP54, not suitable for outdoor use |
Different Speeds and Corresponding Maximum Thrust
| No-load Speed | Full load Speed | Max Load | Working Current | |||
|---|---|---|---|---|---|---|
| 12V version | 24V version | |||||
| No Load | Full Load | No Load | Full Load | |||
| 26±2mm/s | 22±2mm/s | 30 N / 3 kg / 6 lbs | 0.15A | 0.52A | 0.08A | 0.3A |
| 9.5±1mm/s | 6.5±1mm/s | 120 N / 12 kg / 25 lbs | 0.1A | 0.4A | 0.05A | 0.25A |
Note:
1. The above data is the maximum load capacity that can be obtained when the linear actuator runs in the vertical direction. If the weight of your equipment (such as a cabinet door) is 10kg, and you want to use a linear actuator to open this door, you need to calculate the actual force acting on the linear actuator according to your installation method. This force is usually 3-5 times the weight of the cabinet door. If you don't know how to calculate it, please contact us for help.
2. The above is the speed at no load, and the actual working speed will gradually slow down as the load increases. Full load speed is approximately 60-70% of No-load speed.
3. Different speeds correspond to different maximum loads. Please select the right speed according to the speed and maximum load you need.
4. Linear actuators are not recommended for continuous operation under maximum load, we recommend letting it work at about half of the maximum load to get a longer working life.
5. The maximum pull force of the linear actuator is slightly less than its maximum thrust force.
Fixed Bracket and Control Accessories
1. This linear actuator does not contain fixed mounting brackets.
2. If you need a power supply to power linear actuator, please click here to purchase.
3. If you want to use external limit switches to stop linear actuator at any position, please click here to purchase.
4. If you want to use a remote control switch to operate linear actuator wirelessly, please click here to purchase.
Production Time & Return or Exchange Policy
The linear actuators are customized and not in stock, and we need to spend 3~7 working days to produce them according to the specified parameters in your order, so that we don't accept returns or cancel orders. If customers order unsuitable linear actuators themselves, we also do not accept exchanges, please understand.